| Author |
Message |
|
RON @ SUPERCHIPS
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7  Posted: Fri Mar 25, 2011 11:03 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18255
Location: SUPERCHIPS
|
|
Hello
Stock is at or around 170. If you would like fan to turn on, after the thermostat opens, you can set it to about 200. Please understand, we do not alter fan settings, in the tuning. This is a user option. In advanced features.
Ron
_________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
  |
|
 |
|
RON @ SUPERCHIPS
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Fri Mar 25, 2011 11:04 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18255
Location: SUPERCHIPS
|
|
What is it doing back on the stock program?
Ron
_________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Mon Mar 28, 2011 9:44 am |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
I don't run it in the stock program, I only was using the stock program to see if I could hear the fan run, and I couldn't, until 205 deg. I assume what I was hearing at 205 deg. is the medium speed, and low kicks on at a lower temp and I just couldn't hear it. With superchips programming (have only tried 93 performance and tow) I can hear the fan come on much sooner (again I assume the medium speed as I can hear it), at about 120 deg. or so, and the programmer says 118 deg, even when I set it back to stock in the fan settings it still says 118 deg is the stock setting, I'm not changing it. The only way to get it back to normal is to set the whole program back to stock.
On a side note....I recently just tried the tow setting (was using 93 perf and loved it). I read I shouldn't tow in perf setting, why is this? The tow setting really bummed me out as I was used to the perf setting, it isn't as strong and it gets worse mpg. No problem, I understand that's why the other one is called performance. Can I run 87 on tow mode? And if there's no difference between 91 and 93 settings why are they differentiated? Thanks!
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Mon May 16, 2011 10:22 pm |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
Do you have any update on them looking into this, it's been quite a while? I never got a real solution for this...I just tried updating my flashpaq again today and retuned, no difference...I know I sort of thread jacked this topic (sorry) but I'm beginning to get very frustrated, I've had a few issues with my flashpaq, and alot of unanswered questions, and I keep getting told its not the superchips tuning. I really need some answers and help instead of being told that the product doesn't have glitches, before I give up.
|
|
| |
|
|
|
RON @ SUPERCHIPS
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Tue May 17, 2011 8:33 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18255
Location: SUPERCHIPS
|
putnam wrote: i just bought a cortex 3950 and after the 91 tune my ac fans runs all the time. this is on a 2008 4.7l, other than that the tune made a huge improvement. cortex SN:1538012 I need you to update the tuner on the new system. Then retry on the truck. Ron _________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
RON @ SUPERCHIPS
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Tue May 17, 2011 8:34 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18255
Location: SUPERCHIPS
|
snrusnak wrote: The serial number on my flashpaq 3865 is 1537810. Thanks Update on the new system also. Ron _________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Tue May 17, 2011 8:42 am |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
What do you mean update on the new system? I updated it yesterday? I noticed your website has changed, do I need to re download and install the update software?
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Tue May 17, 2011 8:43 am |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
well I just read your signature and that answers my question, I will try this tonight.
|
|
| |
|
|
|
Jeff9329
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Tue May 17, 2011 11:06 am |
|
Joined: Tue Dec 07, 2010 3:51 pm
Posts: 49
Location: Virginia Beach, VA
|
|
Why would there even be an option to change the air conditioner condenser electric fan operation?
I have even noticed occasional running of the electric condenser fan on my 2008 HEMI with the air conditioning completely off. My fan is pretty loud and easy to hear.
_________________
Hemi 2008 Quad-cab TRX-4 - 4.56 axle ratio - 35/12.5-17 (34.50") General Grabber AT2 tires (or 33" Nitto TGs) - JBA headers/custom single 3" exhaust using factory muffler - Suspension: Kore UCAs, King coilovers suspension frt, King system back custom leaves - Bendix HP rotors
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Tue May 17, 2011 8:48 pm |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
I uninstalled the old update software and downloaded the new software, after installing it on my computer and trying to open the software I get an error that says "This application has failed to start because XmlLite.dll was not found. Re-installing the application may fix this problem." I've tried repairing and reinstalling twice, still doesn't work...any suggestions?
|
|
| |
|
|
|
MDSBigPaPa
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Tue May 17, 2011 9:55 pm |
|
Joined: Tue Jun 24, 2008 1:22 pm
Posts: 494
Location: Lima, NY
|
snrusnak wrote: I uninstalled the old update software and downloaded the new software, after installing it on my computer and trying to open the software I get an error that says "This application has failed to start because XmlLite.dll was not found. Re-installing the application may fix this problem." I've tried repairing and reinstalling twice, still doesn't work...any suggestions? What version of Windows are you running? WinXP, Win7, Vista, 32bit 64bit? Try this (from Screenshot Studio) Quote: xmllite.dll can be found there: Web://screenshot-program.com/dloads/xmllite.dllThis is not obligatory to place it into system32 folder. You can save it into any folder specified in the %PATH% variable. Or go to C:\WINDOWS\system32 and move the xmllite.dll file into there... _________________ It is not until you understand what you do not know that the learning process starts. ~ me Mark,  3865 SN: 1495208 3875 SN: 1499193
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Wed May 18, 2011 7:29 am |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
I'm running windows xp, and I think 32bit (it is an old computer), but not positive. I can look tonight. I will try this tonight if I have time, if not then I will try it tomorrow night. Thanks.
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Wed May 18, 2011 9:25 pm |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
the link above did not work, but i found another that is the same except it replaces "web" with "Web" and downloaded it and moved it to the system32 folder and the program now starts up....will update and post back...thank you for the link and instructions
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Wed May 18, 2011 11:00 pm |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
I hate to keep complaining about this stuff, but I still struggled alot with even the new software, it was difficult to get it to work to where it would let me sign in and connect to the tuner, but it did say it updated, and I retuned the truck(everything during this process seemed exactly the same). Haven't driven it yet, but the fan settings were just as they were before, so same problem...
|
|
| |
|
|
|
snrusnak
|
Post subject: Re: 91Perf Tune-Electric Fan Run -07 Ram,5.7 Posted: Thu May 19, 2011 7:55 am |
|
Joined: Thu Feb 10, 2011 9:57 pm
Posts: 71
|
|
In my post above, I don't know why it says "web" then "web" again, I typed " h t t p " (without spaces), I don't know why it's changing it, but anyway for others reference in the beginning of the link above it should not say web, but should say h t t p (no spaces)
|
|
| |
|
|
|
