The Official Superchips Forum

i have a 2001 ford f-150 2wd king ranch, and i ahve the supercip flashpaq 1865 for best performance i wanted to how to install it?

rev limiter:stock or raised?

speed limiter:stock or raised?

axle size: i have a 3.73 stock axle but should i put 3.73 on the chip or leave it in stock?

tire size:i have 32" tires should i put that on the chip or leave it in stock?

shift point:1st-2nd-stock value, stk+ 01mph 100rpm, stk+ 02mph 200rpm, stk+ 03mph 300rpm, stk+ 04mph 400rpm, stk+ 05mph 500 rpm, superchip values.

shift point:2nd-3rd- stock value, stk+ 02mph 100rpm, stk+ 04mph 200rpm, stk+ 06mph 300rpm, stk+ 08mph 400rpm, stk+ 10mph 500rpm, superchip values.

shift pont:3rd-4th- stock values, stk+ 02mph 100rpm, stk+ 04mph 200rpm, stk+ 06mph 300rpm, stk+ 08mph 400rpm, stk+ 10mph 500rpm, superchip values.

shift pressure-1st- 2nd- stock values, stock+ 02 psi, stock+ 04 psi, stock+ 06 psi, stock+ 08 psi, stock+ 10 psi, stock+ 12 psi, stock+ 14 psi, stock + 16 psi, stock + 18 psi, stock + 20 psi, superchip values.

shift pressure-2nd-3rd-stock values, stock+ 02 psi, stock+ 04 psi, stock+ 06 psi, stock+ 08 psi, stock+ 10 psi, stock+ 12 psi, stock+ 14 psi, stock + 16 psi, stock + 18 psi, stock + 20 psi, superchip values.

shift pressure-3rd-4th-stock values, stock+ 02 psi, stock+ 04 psi, stock+ 06 psi, stock+ 08 psi, stock+ 10 psi, stock+ 12 psi, stock+ 14 psi, stock + 16 psi, stock + 18 psi, stock + 20 psi, superchip values.



hope this helps i wanted the best performance ill be glad if you guys would help me choose the best choices those are the option for my flashpaq 1865

I recommend to start off with the advanced tune only changing the tire height to your.

Using the perf tune with 91 or better fuel in the tank.

Leave the Axle ratio at STOCK unless you have physically changed the ratio in the truck.

If you do not adjust the options, they will default to the Superchips presets, which we have optimized for best performance.

Our shifts are set at MAX on the points and the firmness.

Our preset rev and speed limiters are raised.

Ron

_________________
RRAPP@SUPERCHIPS.COM
1-888-227-2447
8-5 EST.

Email me directly if your having ANY trouble with the forum.
Not able to LOGIN, email me with your Username that you registered with.

now i know i ahve to leave the axle in stock also the tire in 32" and the rev and speed limiter raised the only question is on the shift point and shift pressure are the superchip values the highest for best performance or what are the highestt can youe please let me know?

SC values are the MAX of the shifts.

_________________
RRAPP@SUPERCHIPS.COM
1-888-227-2447
8-5 EST.

Email me directly if your having ANY trouble with the forum.
Not able to LOGIN, email me with your Username that you registered with.

ok thanx ..

what is cai and how do i enable it?

CAI =Cold Air Intake

Your motor does not require that this aftermarket part be recalibrated with the tuning to work properly.

_________________
RRAPP@SUPERCHIPS.COM
1-888-227-2447
8-5 EST.

Email me directly if your having ANY trouble with the forum.
Not able to LOGIN, email me with your Username that you registered with.