| Author |
Message |
|
Holston'sHemi
|
Post subject: new sc..won't work!!! HELP!  Posted: Mon Jul 24, 2006 9:54 pm |
|
Joined: Mon Jul 24, 2006 9:46 pm
Posts: 11
Location: pearl city, hi
|
|
ok heres the problem. recieved my new sc 3815 for my 04 ram hemi. i had the hypertech installed before so i reprogrammed it back to stock settings. started her up. ran fine. then followed the sc instructions, and right at the beginning where it says to turn key to on position. my sc tells me cannot detect ignition on. i tried this several times to make sure it wasnt me that screwed it up. still the same thing. if the hypertech works why wont the sc? PLEASE HELP!! ive been waiting for this mod for a while now and now that i finally got it...it doesnt work!! im so frustrated!
|
|
  |
|
 |
|
RON @ SUPERCHIPS
|
Post subject: sc reply Posted: Tue Jul 25, 2006 9:57 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18302
Location: SUPERCHIPS
|
|
Make sure that the ignition is going as far forward as you can without turing the motor over.
If you have a aftermarket remote start or alarm then put the items in valet mode.
What is the build date and VIN number of the vehicle?
Have you updated the tuner on the website?
LMK
_________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
Silveradohunter
|
Post subject: Posted: Tue Jul 25, 2006 7:35 pm |
|
Joined: Fri Jul 21, 2006 8:02 pm
Posts: 6
Location: Oxnard,California
|
|
I also Have a friend with the same problem E-31 cannot detect ignition on,and he also got communication error,once or twice but basically its the E-31 code.Now its vin locked and has to send it back to you guys it was up dated by you guys once when he sent it back the first time,AND IT WAS THE FIRST PROGRAMMER HE BOUGHT,HE got the Hypertech after the Superchips didnt work he has a 05 QC 1500
05 mineral gray laramie QC \Volant cai\Edelbrock headers(TES)Mid-length\Gibson dualsport exhaust\Superchips flashpaq\3.92 anti-spin\20"stock wheels\Hemisport body kit with Daytona exhaust exit cutout\Hemibedliner\SRT-10 a-pillar gauge\bolt on hoodscoop\
|
|
| |
|
|
|
Silveradohunter
|
Post subject: Posted: Tue Jul 25, 2006 7:42 pm |
|
Joined: Fri Jul 21, 2006 8:02 pm
Posts: 6
Location: Oxnard,California
|
|
By the way I forgot to add one of your techs reps said that the Superchips works fine,that the problem had to be his truck,The Hypertech worked fine once and he took his truck in to get serviced(oil change) and returned to stock when he got his truck back he tried to install the Hypertech and it didnt work!,error60 or 6D with them,I told him stick with Superchips give them time they will help you ,but he aint listening to me
05 mineral gray laramie QC \Volant cai\Edelbrock headers(TES)Mid-length\Gibson dualsport exhaust\Superchips flashpaq\3.92 anti-spin\20"stock wheels\Hemisport body kit with Daytona exhaust exit cutout\Hemibedliner\SRT-10 a-pillar gauge\bolt on hoodscoop\
|
|
| |
|
|
|
Holston'sHemi
|
Post subject: Posted: Wed Jul 26, 2006 6:40 am |
|
Joined: Mon Jul 24, 2006 9:46 pm
Posts: 11
Location: pearl city, hi
|
|
ron,
not sure of the vin since im at work but, its an 04 bought it in aug of 04 not sure of the build date. i do have an aftermarket alarm. no remote start. just a standard alarm. i will put it in valet mode and try that. spoke with derek and he said to send it in for a new one, so i will do that if the valet alarm thing doesnt work.
|
|
| |
|
|
|
RON @ SUPERCHIPS
|
Post subject: sc reply Posted: Wed Jul 26, 2006 8:22 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18302
Location: SUPERCHIPS
|
|
The VIN will help determine some things.
The most information you can give would help.
_________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
Holston'sHemi
|
Post subject: Posted: Wed Jul 26, 2006 9:03 am |
|
Joined: Mon Jul 24, 2006 9:46 pm
Posts: 11
Location: pearl city, hi
|
|
ron,
ill get that VIN # to ya, i put my alarm in valet mode and tried the to SC. that didnt work. i still got the cannot detect ignition. i made sure the key was in the on position.
|
|
| |
|
|
|
