| Author |
Message |
|
guitar_freak1919
|
Post subject: throttle position ?  Posted: Wed Apr 25, 2007 4:19 pm |
|
Joined: Sat Sep 16, 2006 4:53 pm
Posts: 82
|
|
should my throttle positon be at 12 % when im sitting still with my foot off the gas seems odd to me but i dont know alot about all this new car sensor crap ?
|
|
  |
|
 |
|
AtumAnt
|
Post subject: Posted: Wed Apr 25, 2007 7:53 pm |
|
Joined: Tue Nov 28, 2006 5:46 pm
Posts: 23
Location: IL
|
|
Here's another good question.... Why is full throttle only registering at 85%? I know of quite a few trucks that when logging at wot, it only reads 85%?????
_________________
Adam
'04 Dodge Ram
|
|
| |
|
|
|
mike.higham
|
Post subject: Posted: Wed Apr 25, 2007 7:59 pm |
|
Joined: Wed Nov 29, 2006 8:45 pm
Posts: 199
|
|
Throttle reads in degrees. 12 is actually 12* plate positon (IDLE)- if it goes to 0 the car/truck will stall (No IAC).
The MAX is 90*. Most will go to about 85-87 so it doesn't slam the stop, burn up the motor and make a racket. Read the MAP value to make sure you are going to WOT.
Mike
|
|
| |
|
|
|
guitar_freak1919
|
Post subject: Posted: Wed Apr 25, 2007 8:00 pm |
|
Joined: Sat Sep 16, 2006 4:53 pm
Posts: 82
|
|
i belive mine goes to 100 % but like i said its its at 12 % with no pressure
|
|
| |
|
|
|
guitar_freak1919
|
Post subject: Posted: Wed Apr 25, 2007 8:02 pm |
|
Joined: Sat Sep 16, 2006 4:53 pm
Posts: 82
|
|
im gonna have to do some test runs later thanks
|
|
| |
|
|
|
AtumAnt
|
Post subject: Posted: Thu Apr 26, 2007 11:58 pm |
|
Joined: Tue Nov 28, 2006 5:46 pm
Posts: 23
Location: IL
|
|
Thanks Mike, that explains the readings.
_________________
Adam
'04 Dodge Ram
|
|
| |
|
|
|
mxtime
|
Post subject: Posted: Thu May 10, 2007 12:55 pm |
|
Joined: Sat Apr 28, 2007 7:40 pm
Posts: 109
|
|
Yeah I was looking and mine is 85% Guess I'm going to have to read the MAP value...
|
|
| |
|
|
|
