| Author |
Message |
|
bpetroni
|
Post subject: DAQ 2 feature  Posted: Mon Oct 01, 2012 7:28 pm |
|
Joined: Wed Sep 19, 2012 6:41 am
Posts: 3
|
|
Ron,
I just recieved a Flashpaq Tuner for my 01 Silverado and noticed in the DAQ 2 feater that I can compare my "tuned" gains with my stock settings. I could not figure out how to access DAQ 2. Do I need to download this feature.
I have read a couple of postings and wanted to confirm that I still use my stock TOW/HAUL feature while using the TOW tune?
Thank You
|
|
  |
|
 |
|
RON @ SUPERCHIPS
|
Post subject: Re: DAQ 2 feature Posted: Tue Oct 02, 2012 8:39 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18302
Location: SUPERCHIPS
|
|
DAQ-1 is log by speed/distance
DAQ-2 is the PID monitor (sensors on the motor)
Do an update to the tuner and at the end of the update there should be a DAQ-2 to download to the tuner.
Ron
_________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
bpetroni
|
Post subject: Re: DAQ 2 feature Posted: Wed Oct 03, 2012 2:29 am |
|
Joined: Wed Sep 19, 2012 6:41 am
Posts: 3
|
|
Thanks for the speedy response Ron. I uninstalled my previous download and tried the update and now I am getting a "Sorry unable to recognize registration" message. I went to the registration link and confirmed my current registration status.
|
|
| |
|
|
|
RON @ SUPERCHIPS
|
Post subject: Re: DAQ 2 feature Posted: Wed Oct 03, 2012 8:15 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18302
Location: SUPERCHIPS
|
|
Try it now, I made an adjustment to your account. You were not validated.
Ron
_________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
bpetroni
|
Post subject: Re: DAQ 2 feature Posted: Wed Oct 03, 2012 6:54 pm |
|
Joined: Wed Sep 19, 2012 6:41 am
Posts: 3
|
|
It worked..Ok if I want to check my gains that the Tuner is giving me over stock how do I access the information?
|
|
| |
|
|
|
RON @ SUPERCHIPS
|
Post subject: Re: DAQ 2 feature Posted: Thu Oct 04, 2012 8:17 am |
|
Joined: Tue Jul 25, 2006 9:41 am
Posts: 18302
Location: SUPERCHIPS
|
|
The gains will be measured by either log by speed or distance.
Go to either option select it and follow the prompts.
You would have to test at stock vs. programmed.
Ron
_________________ RRAPP@SUPERCHIPS.COM 1-888-227-2447 8-5 EST. Email me directly if your having ANY trouble with the forum. Not able to LOGIN, email me with your Username that you registered with.
|
|
| |
|
|
|
